Home » Categories » Digital Phone Service

I Have No Dial Tone. What to do?

1. The absence of a dial tone can be the result of bad connection with the Ethernet or Internet connection.  Look for the INTERNET Light (Front of Phone Adapter):  This indicates if the adapter is receiving an active Internet connection from your provider. Usually if this light is "NOT ON" this means that the ATA (Phone Adapter) has not been registered properly. Power cycle the ATA by unpluging the power plug. If a router is installed at this location it may be necessary to also power cycle the router.
2. Ensure your phone is plugged to the Phone 1 port of the ATA (phone adapter). A common mistake is to plug it in the Phone 2 port, leaving Phone 1 empty. Phone 2 should be used only if there is a second line or a fax line.
3. Have you used a proper RJ-11 jack (commonly called a telephone jack)?  If you have, check whether it is well fitted in the port. It will work only if you hear a 'click' when plugging it in, else it stays loose. There is a little tongue on the side of the jack that ensures proper 'clicking' and fitting of the jack to the port. That tongue very often easily gets torn off, especially with frequent removal and insertion of the jack. If that happens, have the jack replaced.  If the RJ-11 cord is an old one, there are chances that it is not transmitting data as it should, due to the effects of temperature, deformation etc. Have the cords replaced.
4. The problem can also be with your phone set. Try connecting another phone and check if you get a dial tone.
5. Also, if your phone set is connected to the wall jack (PSTN) while being also connected to the adapter, you will not get a dial tone. This can furthermore be damaging to the equipment. A phone used with a VoIP adapter should not be connected to the PSTN wall jack, unless so specified. 
6. If you are still experiencing problems call tech support at 803-533-1660.
Attachments Attachments
There are no attachments for this article.
Related Articles
How can I eliminate echo during a phone conversation?
Viewed 1964 times since Thu, Jun 6, 2013
Setting up your VoIP Adapter with One Computer.
Viewed 4621 times since Thu, Jun 6, 2013
How do I port my current phone number to NTInet VoIP Phone Service!
Viewed 1688 times since Thu, Jun 6, 2013
I’m Having trouble sending a fax with VoIP Phone Service.
Viewed 2187 times since Thu, Jun 6, 2013
How do I manage my Digital Voice Features & Settings?
Viewed 1999 times since Wed, Nov 27, 2013
Setting up your Digital Voice Adapter with Multiple Computers
Viewed 1406 times since Thu, Jun 6, 2013
Light Statuses for the Linksys SPA2102 VoIP Adapter.
Viewed 3563 times since Thu, Jun 6, 2013
How to connect my VoIP adapter to my existing house wiring?
Viewed 4936 times since Thu, Jun 6, 2013
How to Port your number when you have DSL
Viewed 1577 times since Thu, Jun 6, 2013